.jpg "FLAVIAspeed E-Bike Tuning - Yamaha PW-X3/PW-S2 V3")
.jpg "Preview: FLAVIAspeed E-Bike Tuning - Yamaha PW-X3/PW-S2 V3")
FLAVIAspeed E-Bike Tuning - Yamaha PW-X3/PW-S2 V3
.jpg "FLAVIAspeed E-Bike Tuning - Yamaha PW-X3/PW-S2 V3")
Tuning chip for permanent installation in e-bikes / pedelecs with Yamaha PW-X3 and PW-S2 drive!
Compatible with Sideswitch (Display A), Multiswitch (Display C) and the Display X.
Not compatible with Yamaha MORO 07!
The device is installed on the drive motor, invisible from the outside. The installation is done in 15-30 minutes. No cables need to be damaged or modified, the module is simply plugged in.
No PC or smartphone is needed. All settings are made via the display on the bike.
We recommend, if you have installed the module and everything works perfectly, not to make any new software updates, since the module for the current software version has been programmed!
It can not be guaranteed that a tuning after an update still works perfectly, because it was programmed for the current version and for older versions.
New in the now third version of the module is the possibility to set an own code for activation. In addition, setup is now no longer required after installation. The module is immediately ready for operation.
Features:
Technical specifications:
• Dimensions: 37mm x 19mm x 9mm
• Cable length: approx. 140mm
• Weight: 0.025kg
• Power consumption: 0.1W
• Supply voltage: 5VDC.
Delivery:
• Tuning module
• Installation and operating instructions.
Legal and safety information / product liability
Operation of the e-bike in public traffic is no longer permitted after installation of the module. The use is only allowed on private or designated test and race tracks.
Damage caused in connection with the operation of the e-bike will not be covered by a private insurance after installation.
Liability, warranty and warranty claims against the dealer or manufacturer of the e-bike expire or are severely limited.
The e-bike is subject to a higher mechanical stress by operating at higher speeds for which it is not designed. This results in additional security risks.
The installation and operation of the module is at your own risk. The manufacturer accepts no liability for damage that is connected with the operation of the device.
Please inform yourself before installing the device about possible further technical and legal consequences.
Compatible with Sideswitch (Display A), Multiswitch (Display C) and the Display X.
Not compatible with Yamaha MORO 07!
The device is installed on the drive motor, invisible from the outside. The installation is done in 15-30 minutes. No cables need to be damaged or modified, the module is simply plugged in.
No PC or smartphone is needed. All settings are made via the display on the bike.
We recommend, if you have installed the module and everything works perfectly, not to make any new software updates, since the module for the current software version has been programmed!
It can not be guaranteed that a tuning after an update still works perfectly, because it was programmed for the current version and for older versions.
New in the now third version of the module is the possibility to set an own code for activation. In addition, setup is now no longer required after installation. The module is immediately ready for operation.
Features:
- Automatic initialization, immediately ready for operation after installation – plug and ride.
- Tuning can be turned on or off via the arrow keys on the control unit.
- The turn-off speed can be set freely after switching on via the arrow keys in the range 25 - 45km / h. The last set value is saved.
- The tuning chip is always off after turning on the bike.
- Dynamic mode is possible. The last setting is saved.
- Individual activation code adjustable.
- Correct display of speed and distance traveled at all times.
- Remaining range calculation from current driving style with active tuning.
- Battery indication in percent alternately to the remaining range with active tuning. Interval: 4 seconds range, one second battery level.
- Correct total mileage reading even after removing the tuning module, because the kilometers in the motor control are corrected by the tuning module.
- Wheel circumference adjustable (+/-10%) to improve the accuracy of the speed display and distance measurement.
Technical specifications:
• Dimensions: 37mm x 19mm x 9mm
• Cable length: approx. 140mm
• Weight: 0.025kg
• Power consumption: 0.1W
• Supply voltage: 5VDC.
Delivery:
• Tuning module
• Installation and operating instructions.
Legal and safety information / product liability
Operation of the e-bike in public traffic is no longer permitted after installation of the module. The use is only allowed on private or designated test and race tracks.
Damage caused in connection with the operation of the e-bike will not be covered by a private insurance after installation.
Liability, warranty and warranty claims against the dealer or manufacturer of the e-bike expire or are severely limited.
The e-bike is subject to a higher mechanical stress by operating at higher speeds for which it is not designed. This results in additional security risks.
The installation and operation of the module is at your own risk. The manufacturer accepts no liability for damage that is connected with the operation of the device.
Please inform yourself before installing the device about possible further technical and legal consequences.